english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski
빠른 연락
주소
3개를, 우수 세기 센터 건축하는, 방 1920년 Shibei 지역, 칭다오, 산둥 성, 중국
TEL :
86-133-7148-2686
우리 뉴스레터
할인 및 더 많은 정보를 얻기 위해 뉴스레터에 가입하십시오.
발견 276 의 결과 "
large mooring buoys
"
배 단미를 위한 높은 가스 견고 해저 구조망 고무 물자
1.SGS Passed High Gas Tightness Submarine Rubber Fenders For Ship Docking "Yokohama Pneumatic Inflatable Rubber Fender " progress in the development of such floating pneumatic rubber fenders is closely related to the progress and development of ship technology, and has to continuously cope with progressively larger oil tankers such as VLCC's, ULCC's, large gas carriers, bulk carriers and floating structures. Floating pneumatic fenders are used world wide for ship-to-ship (STS
조선소를 위한 Q235에 의하여 직류 전기를 통하는 플랜지 팽창식 배 구조망 높은 내구성
1.Good Quality with Q235 Galvanized Flange High Durability Submarine Fenders For Shipyard "Yokohama Pneumatic Inflatable Rubber Fender " progress in the development of such floating pneumatic rubber fenders is closely related to the progress and development of ship technology, and has to continuously cope with progressively larger oil tankers such as VLCC's, ULCC's, large gas carriers, bulk carriers and floating structures. Floating pneumatic fenders are used world wide for
배 충돌을 위한 높은 공기 불침투성 압축 공기를 넣은 바다 구조망 0.05MPA
1.High Air impermeability 0.05MPA Pneumatic Marine Fender Using for the Ship Collision "Yokohama Pneumatic Inflatable Rubber Fender " progress in the development of such floating pneumatic rubber fenders is closely related to the progress and development of ship technology, and has to continuously cope with progressively larger oil tankers such as VLCC's, ULCC's, large gas carriers, bulk carriers and floating structures. Floating pneumatic fenders are used world wide for
체인과 타이어와 도킹하기 위한 선박을 위한 ISO9001 증명서 요코하마 펜더
Yokohama Fenders for ship to dock With ISO9001 Certificate ►Pneumatic rubber fender introduction 1 Outer rubber The outer rubber layers that covers the outside of fender protects the cord layers and the inner rubber from abrasion and other external forces. This compound has sufficient tensile and tear strength to withstand any weather condition and hard usage. Standard color is black, but other colors are available on request. 2 Inner rubber The liner of a rubber membrane
2.0*3.5m 떠있는 내노화성 해양 보트 팬더
With chain and tire net-Yokohama type marine fender Floating pneumatic rubber fender Floating pneumatic rubber fender is a fender made of a rubber sheet reinforced by synthetic cords, with compressed air inside to enable it to float on the water, and between ships and berthing structures. Acts as an absorber on the water when close. The design and selection of floating fenders can be determined according to the maximum energy absorption under specific conditions. We should
4.5*9m 떠있는 부식 방지 공기 고무 방현재 CCS BV 증명서
4.5*9m Floating Anti Corrosion Pneumatic Rubber Fender 1.Galvanized Tyre-Chain Net Anti Corrosion Pneumatic Floating Nature Rubber Fender "Yokohama Pneumatic Inflatable Rubber Fender " progress in the development of such floating pneumatic rubber fenders is closely related to the progress and development of ship technology, and has to continuously cope with progressively larger oil tankers such as VLCC's, ULCC's, large gas carriers, bulk carriers and floating structures.
타이어와 부풀게할 수 있는 고무배 부두 공기 고무 방현재
Inflatable Rubber Boat Dock Pneumatic Rubber Fenders With Tyre Pneumatic marine fenders are ideal for permanent and semi-permanent port applications where there is a solid wharf structure or a suitable support frame. Because pneumatic marine fenders are easy to install, they can be quickly redeployed to wherever they are needed. Pneumatic marine fenders can also be used as an auxiliary protection. They can also be used for special ships when permanent fixed fenders are not
ISO17357 증명서를 가진 늑골을 붙인 유형 바다 선창 범퍼 Fen 보호 연료 배
Used For Protecting Fuel Ship With Ribbed Type Pneumatic Marine Rubber Fender With ISO17357 Certification The "Yokohama Type Dock Fender" was developed in 1958. Progress in the development of such floating pneumatic rubber fenders is closely related to the progress and development of ship technology, and has to continuously cope with progressively larger oil tankers such as VLCC's, ULCC's, large gas carriers, bulk carriers and floating structures. Floating pneumatic fenders
